- Building Notable American Furniture Since 1983 -
Chairs
Furniture is available in Walnut, Mahogany, Cherry, maple or other wood of your choice. Wood will add 5 to 10% to the cost. Prices will be adjusted accordingly. All hardware is extra. Uphostered pieces are priced in muslin., Your choice of fabricc is extra. We have thousands of patterns and colors for youto choose from in our showroom. For orders or inquiries, please call 410-778-3993 or email gadroon@crosslink.net |
|---|
Queen Anne Mahogany Arm ChairThe scrolled crest rail with volutes is flat in back with rounded edges. The shell is carved from the solid. The serpentine butterfly back splat with carved volutes is one piece of wood. The stiles pierced at their curves are rounded in back. The arm supports, pegged to the arms, are rounded behind their shaped fronts; the arm supports rounded in the front with serpentine back edges are screwed to the side rails. The bold carved balloon seat with cut out flat arch and half arches on the sides has an applied rounded rim cut from the same stock. The seat rails are through tenoned as are the carved cabriole legs which end in trifid feet., each with a central raised tongue. The antique finish is hand applied and rubbed to achieve a rich patina. Arm Chair |
|
 |
Queen Anne Maple Side ChairThe baluster splat on the back of this chair is markedly serpentine in profile. The beveled rectangular stiles become rounded on the back edges approaching the yoke crest rail. The scalloped skirt is tenoned with a gracefully carved Queen Anne leg ending in a pad foot. The block and arrow stretcher base is fully mortised and tenoned. The antique finish is hand applied and rubbed to achieve a rich patina. 41-3/4" H x 21" W x 20"
D |
Queen Anne Walnut Moravian Arm ChairThe upholstered front has a canted rail with outward exposed walnut wings. The arm and seat rails are through dovetailed. The seat frame is mortised, tenoned, and pinned with cabriole legs ending in pad feet. The antique finish is hand applied and rubbed to achieve a rich patina. 46" H x 261/2" L X 27" W |
 |
 |
Chippendale Walnut Corner ChairThe crest rail, rounded in front, flat in back, with cut out ends is affixed to the arm rest rail. All three stiles are pegged to the arm rest rail. The matching pierced splats mortise into the seat and arm rest rail. The cross stretchers mortise into the beveled legs. The front leg is molded. The slip seat is rush covered with natural cane. The antique finish is hand applied and rubbed to archieve a rich patina. 30-1/2" H x 25-3/4" W x 24-1/2"
D |
Queen Anne Carved Walnut Back StoolThis chair has a tall upholstered canted back above a balloon shaped seat, on a frontal cabriole legs carved at the knees, with C-scrolls ending in pad feet. The rear cabriole legs are joined by a carved serpentine flat medial stretcher with molded edge and turned stretcher at the back. The brass is sand cast. The antique finish is hand applied and rubbed to archieve a rich patina. 41-1/2" H x 20" L x 21"W |
 |
 |
Queen Anne Walnut DaybedThis couch has turned rear legs, six pad-footed cabriole legs, turned cross stretchers, and an adjustable back; composed of a baluster splat, tenoned into the yoke crest rail. The frame is fully mortised, tenoned and pegged. The antique finish is hand applied and rubbed to achieve a rich patina. 41" H x 72" L x25"
W |
Chippendale Mahogany
|
 |
 |
|
Queen Anne Walnut Wing ChairThe fully upholstered strait canted back has
arched cresting scrolled wings and upright conical outward
scrolling arms. The seat has a loose cushion on cabriole
legs joined by block and ring turned stretchers ending in
pad feet. The square rear maple splayed leg is continuous
from crest through the stretcher base The antique finish
is hand applied and rubbed to achieve a rich patina. 46’Hx32Lx~1’W |
|
